Wireless networks broadcast their packets using radio frequency or optical
wavelengths. A modern laptop computer can listen in. Worse, an attacker can
manufacture new packets on the fly and persuade wireless stations to accept
his packets as legitimate.
The step by step procerdure in wireless hacking can be explained with help of
different topics as follows:-
1) Stations and Access Points : A wireless network interface card (adapter) is
a device, called a station, providing the network physical layer over a radio
link to another station.
An access point (AP) is a station that provides frame distribution service to
stations associated with it.
The AP itself is typically connected by wire to a LAN. Each AP has a 0 to 32
byte long Service Set Identifier (SSID) that is also commonly called a
network name. The SSID is used to segment the airwaves for usage.
2) Channels : The
stations communicate with each other using radio frequencies between 2.4 GHz
and 2.5 GHz. Neighboring channels are only 5 MHz apart. Two wireless networks
using neighboring channels may interfere with each other.
3) Wired Equivalent Privacy (WEP) : It is a shared-secret key encryption system
used to encrypt packets transmitted between a station and an AP. The WEP
algorithm is intended to protect wireless communication from eavesdropping. A
secondary function of WEP is to prevent unauthorized access to a wireless
network. WEP encrypts the payload of data packets. Management and control
frames are always transmitted in the clear. WEP uses the RC4 encryption
algorithm.
4) Wireless Network Sniffing : Sniffing is eavesdropping on the network. A
(packet) sniffer is a program that intercepts and decodes network traffic
broadcast through a medium. It is easier to sniff wireless networks than
wired ones. Sniffing can also help find the easy kill as in scanning for open
access points that allow anyone to connect, or capturing the passwords used
in a connection session that does not even use WEP, or in telnet, rlogin and ftp
connections.
5 ) Passive Scanning : Scanning is the act of sniffing by tuning to
various radio channels of the devices. A passive network scanner instructs
the wireless card to listen to each channel for a few messages. This does not
reveal the presence of the scanner. An attacker can passively scan without
transmitting at all.
6) Detection of SSID : The attacker can discover the SSID of a
network usually by passive scanning because the SSID occurs in the following
frame types: Beacon, Probe Requests, Probe Responses, Association Requests,
and Reassociation Requests. Recall that management frames are always in the
clear, even when WEP is enabled.
When the above methods fail, SSID discovery is done by active scanning
7) Collecting the MAC Addresses : The attacker gathers legitimate MAC addresses
for use later in constructing spoofed frames. The source and destination MAC
addresses are always in the clear in all the frames.
8) Collecting the Frames for Cracking WEP : The goal of an attacker is to discover the WEP
shared-secret key. The attacker sniffs a large number of frames An example of
a WEP cracking tool is AirSnort ( http://airsnort.shmoo.com ).
9) Detection of the Sniffers : Detecting the presence of a wireless sniffer,
who remains radio-silent, through network security measures is virtually
impossible. Once the attacker begins probing (i.e., by injecting packets),
the presence and the coordinates of the wireless device can be detected.
10) Wireless Spoofing : There are well-known attack techniques known
as spoofing in both wired and wireless networks. The attacker constructs
frames by filling selected fields that contain addresses or identifiers with
legitimate looking but non-existent values, or with values that belong to
others. The attacker would have collected these legitimate values through
sniffing.
11) MAC Address Spoofing : The attacker generally desires to be hidden.
But the probing activity injects frames that are observable by system
administrators. The attacker fills the Sender MAC Address field of the
injected frames with a spoofed value so that his equipment is not identified.
12) IP spoofing : Replacing the true IP address of the sender
(or, in rare cases, the destination) with a different address is known as IP
spoofing. This is a necessary operation in many attacks.
13) Frame Spoofing : The attacker will inject frames that are valid
but whose content is carefully spoofed.
14) Wireless Network Probing : The attacker then sends artificially
constructed packets to a target that trigger useful responses. This activity
is known as probing or active scanning.
15) AP Weaknesses : APs have weaknesses that are both due to
design mistakes and user interfaces
16) Trojan AP : An attacker sets
up an AP so that the targeted station receives a stronger signal from it than
what it receives from a legitimate AP.
17) Denial of Service : A denial
of service (DoS) occurs when a system is not providing services to authorized
clients because of resource exhaustion by unauthorized clients. In wireless
networks, DoS attacks are difficult to prevent, difficult to stop. An
on-going attack and the victim and its clients may not even detect the
attacks. The duration of such DoS may range from milliseconds to hours. A DoS
attack against an individual station enables session hijacking.
18) Jamming the Air Waves : A
number of consumer appliances such as microwave ovens, baby monitors, and
cordless phones operate on the unregulated 2.4GHz radio frequency. An
attacker can unleash large amounts of noise using these devices and jam the
airwaves so that the signal to noise drops so low, that the wireless LAN
ceases to function.
19) War Driving : Equipped with
wireless devices and related tools, and driving around in a vehicle or
parking at interesting places with a goal of discovering easy-to-get-into
wireless networks is known as war driving. War-drivers
(http://www.wardrive.net) define war driving as “The benign act of locating
and logging wireless access points while in motion.” This benign act is of
course useful to the attackers.
Regardless of the protocols, wireless networks will remain potentially
insecure because an attacker can listen in without gaining physical access.
|
Tips for Wireless Home Network Security
|
|
1) Change Default Administrator Passwords (and Usernames)
2) Turn on (Compatible) WPA / WEP Encryption
3) Change the Default SSID
4) Disable SSID Broadcast
5) Assign Static IP Addresses to Devices
6) Enable MAC Address Filtering
7) Turn Off the Network During Extended Periods of Non-Use
8) Position the Router or Access Point Safely
To know them better, google them.
Thank you (zer0w0rm)
